* What the BUMP * How to Make & Use a BumpKey Lockpicking

seeders: 8
leechers: 11
Added on May 22, 2015 by Secludishin Movies > Documentary
Torrent verified.



* What the BUMP * How to Make & Use a BumpKey Lockpicking (Size: 943.42 MB)
 What the BUMP. How to use ad MAKE a bumpkey.avi943.42 MB

Description


image
Lock bumping is a lock picking technique for opening a pin tumbler lock using a specially crafted bump key. A bump key must correspond with the target lock in order to function correctly.

Enjoy and please comment.
Note: This is NOT HQ. In fact if wasn't asked to, I was going to leave this in the vault. However, it is VERY interesting for all into locks and security.
Torrent hash: 6E56CCBA6E313B5CD44715C8A84191254EE5DEC6
image

image
From wiki:

A pin tumbler lock is composed of a series of spring-loaded stacks called pin stacks. Each pin stack is composed of two pins that are stacked on top of each other: the key pin, which touches the key when it is inserted, and the driver pin, which is spring driven. When the different length key pins are aligned at their tops by the insertion of the correspondingly cut key at their bases, the tops of the key pins and, consequently, the bases of the driver pins, form a straight line (the "shear line"), so that the cylinder can be turned, rotating the key pins away from the driver pins. When no key or the wrong key is in the lock, pin misalignment prevents the cylinder from turning.

When bumping a lock, the key is initially inserted into the keyway one notch (pin) short of full insertion. Bumping the key inward forces it deeper into the keyway. The specially designed teeth of the bump key transmit a slight impact force to all of the bottom pins in the lock. The key pins transmit this force to the driver pins; the key pins stay in place.This physics action can be visualized by observing the same effect on the desktop toy: Newton's cradle. Because the pin movements are highly elastic, the driver pins "jump" from the key pins for a fraction of a second, moving higher than the cylinder (shear line of the tumbler), then are pushed normally back by the spring to sit against the key pins once again. Even though this separation only lasts a split second, if a light rotational force is continuously applied to the key during the slight impact, the cylinder will turn during the short separation time of the key and driver pins, and the lock can be opened while the driver pins are elevated above the keyway. Lock bumping takes only an instant to open the lock. The lock is not visibly damaged, although the force of the bump can leave an indentation on the front of the cylinder. Certain clicking and vibrating tools designed for bumping can also be used. These allow for rapid repetition of bumping against locks that have advertised "bump proof" features. Only a rare few key-pin locks cannot be bumped.

A different tool with a similar principle of operation is a pick gun.

Sharing Widget


Download torrent
943.42 MB
seeders:8
leechers:11
* What the BUMP * How to Make & Use a BumpKey Lockpicking