Star Wars Episode VII The Force Awakens (2015) 1080p BluRay 5.1 Ch x265 HEVC-SUJAIDR[UTR]

Thanks!

lesson = 10 too!

Thanks

Thank you.

Very good encode. Very little loss of quality except it gets slightly grainy during dark scenes.

Uhhhh.... I happened to see this torrent by accident and feel compelled to comment on the aspect ratio thing. Just because sujaidr didn't remove the black bars of the Bluray source doesn't mean the aspect ratio is wrong. If you take a look at the screenshots, the part of the frame that is the actual picture IS 2,35:1 in this torrent as well.

Having a wrong aspect ratio would mean that the picture is too wide or high... and it isn't.

if you dont know about anything then dont spam.
which source of mine has that aspect ratio
you download from people who use small sized brrips to encode and their aspect ratio is all screwed up and you come and tell me my encode is bad
you parasite,you disgust me
my source is Star Wars Episode VII The Force Awakens 2015 REMUX 1080p BluRay AVC DTS-HD MA7 1-iFT
i know for sure you cant even get any info of it cause you are a nothing
the info for that
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant

take your unnecessary spamming hiding behind anonymity off my pages and uploads...sick

if you dont know about anything then dont spam.
which source of mine has that aspect ratio
you download from people who use small sized brrips to encode and their aspect ratio is all screwed up and you come and tell me my encode is bad
you parasite,you disgust me
my source is Star Wars Episode VII The Force Awakens 2015 REMUX 1080p BluRay AVC DTS-HD MA7 1-iFT
i know for sure you cant even get any info of it cause you are a nothing
the info for that
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant

take your unnecessary spamming hiding behind anonymity off my pages and uploads...sick

He's actually not wrong Sujiadr. The source has the black bars, but the movie itself is displayed in a 2.35:1 aspect ratio. It's the job of the encoder to crop the black bars.

no,its not the job of the encoder to crop black bars,if others do it then it doesnt become the norm..by cropping the black bars one is changing the aspect ratio,i am maintianing the aspect ratio by maintaining the black bars,get your facts right.....
source has the movie as it was supposed to,black bars included...the display is full 1080p just because there are black bars doesnt mean they are not part of the movies,it maintains the aspect ratio
i dont have to explain something so simple everytime...read up people

Nope. I'm sorry, but you're wrong. Just because the Blu-ray has the black bars, doesn't mean you should keep them. By keeping them you're actually messing with the aspect ratio.

Did you see black bars on the movie in the theatre? Didn't think so.
You can also refer to the specifications of the film here:
http://www.imdb.com/title/tt2488496/technical?mode=desktop

Notice how it's not 16:9? The film was shot as 2.35:1, not 16:9.

LOL What does it matter?

I think the only time it matters is for people that don't use a computer for playback. Some people still like to burn to optical discs. (not me) If the file is not 16:9, Blu-ray players can't deal with it. Also if some people play the file directly through USB on their TV, same thing, it needs to be 16:9. TV's have zoom, expand, stretch modes, but they can't be adjusted for many aspect ratios. That's my theory and I'm sticking to it : )

from another encoder grym's explanation regarding your black bars

So how can I watch your not cropped x264 rip in the so-called 2.35:1
Anamorphic/Letterbox image, mate?

---

For starters we have Film Aspect Ratio = Letterbox, CinemaScope, PanaVision etc. =
2.35:1, 1.85:1, 1.66:1, 1.33:1 ect. Film Aspect Ratio is the ratio of the width
of the visible area of the video/film frame to the height of the visible area,
measuring from a 4:3 TV Display. All the Cinematic Aspect Ratios/Framings
mentioned just above apply to the HD resolutions 1080p (NOT 800p) and 720p (NOT
544p) and to the standard resolutions as well, being the DVD resolutions 720x576p
(PAL) & 640x480p (NTSC).

Then we have the "black bars". These areas are black to allow for better
contrast. The wrongly called "black bars" is in fact part of the image! So if any
part of the black unused areas is cropped/cut of the image then the original
aspect/scope/letterbox ratio is lost! That goes for all BD/DVD resolutions.

I know that a Blu-Ray player cannot playback anamorphic/letterbox material like
the DVD player can, but the anamorphic/letterbox/Framing/Aspect Ratio scope is
still in the transfer/encode, so for this to work you have to rip the Blu-Ray
disc to PC, and play it back anamorphic/letterbox from PC. Or you can grab one of
Grym's uncropped x264 rips and use that for anamorphic/letterbox playback from PC.

You can set a DVD player & also HD Box's to Display Aspect Ratio setting 4:3 and
receive correct aspect ratio/framing (Not all HD Box's apply). All the 16:9
setting in a DVD & Blu-Ray player or HD Box do, is to crop the image. That's it.

You can watch the movie in original 2.35:1 anamorphic/letterbox scope,
like you do in the theater, by setting the aspect ratio in your software player
to 2.35:1.

Example:

Open a 2.35:1 Grym mkv encode or retail BD 2.35:1 m2ts file in MPC-HC. Right
click in center of MPC-HC screen. Choose 'Video Frame'. Choose 'Override Aspect
Ratio'. Choose '235:100' (2.35:1). Display Aspect Ratio setting on your 16:9 flat
screen you set to 1:1 pixel mapping or whatever the name is on your telly. On my
own Pioneer Kuro LX5090H 16:9 flat TV it's called Dot by Dot. Now play mkv.

Ok, now try using same playback procedure with a cropped so-called "2.35:1"
1920x800 rip/file. 1920x800 cannot be 2.35:1 on a tv screen (Where it Counts),
because The Cinematic Aspect Ratios has nothing to do with Resolution! Aspect
Ratio is a Framing tool for images in the cinema business. So it's impossible to
get a correct 2.35:1 framed image on a correct set tv screen when the resolution
is cropped to 1920x800, because now the image has been manipulated to a 1.85:1
framing simply because part of the black areas are cropped of.

If you want to watch 1.85:1 aspect ratio movies in the correct aspect ratio
you then set the aspect ratio to 2.35:1 as well, and the image will have the
"small" black bars.

Cinematic Aspect Ratios on 16:9 flat TV: Display Aspect Ratio setting on TV set
to 1:1 pixel mapping and resolution is 1080p. Resolution could also be 720p, 480p
or 576p, the Framing/Aspect Ratio would be the same:

1.33:1 - Black bars on all sides of image (4:3) - Aka 1.37:1 Academy Standard
Image: http://someimage.com/rLrxESc

1.66:1 - Black bars on all sides of image (Small L+R) - Movies
Image: http://someimage.com/1ck9wcT

1.78:1 - Full screen. Image fills whole of screen (16:9) - HDTV & Home Video
Image: http://someimage.com/BqgDoMB

1.85:1 - Black bars Top & Bottom of image (Small) - Movies, HDTV & Home Video
Image: http://someimage.com/90ZxXoJ

2.35:1 - Black bars Top & Bottom of image (Big) - Aka 2.40:1 & Anamorphic Scope
Image: http://someimage.com/ll7hnDY

2.35:1 on a theater screen: http://someimage.com/aopL0DM

Links:

http://www.widescreen.org/index.shtml

http://en.wikipedia.org/wiki/Letterboxing_(filming)

That was some dose of knowledge, phew!

PS: keep up the great work, hail UTR

great quality

What's a good media player I can hook up to my TV that can handle 10 bit HEVC encodes? I have a Western Digital TV Live player I've used for years and it handles everything except h.265 HEVC. More and more releases are HEVC now, wish I could play them back. If anybody has any suggestions send me a message instead of responding on here, I won't check these comments again.

excellent - thanks 4 sharing