| | 01.Introduction to CAMWorks Milling - 01.CAMWorks Interface.mp4 | 3.25 MB |
| | 01.Introduction to CAMWorks Milling - 02.Process Overview.mp4 | 1.93 MB |
| | 02.CAMWorks 2.5 Axis Milling - 01.Intro to 2.5 Axis Milling.mp4 | 989.23 KB |
| | 02.CAMWorks 2.5 Axis Milling - 02.Defining the Machine.mp4 | 7.83 MB |
| | 02.CAMWorks 2.5 Axis Milling - 03.Defining the Stock - Bounding Box.mp4 | 3.86 MB |
| | 02.CAMWorks 2.5 Axis Milling - 04.Defining Stock from STL.mp4 | 2.16 MB |
| | 02.CAMWorks 2.5 Axis Milling - 05.Defining the Stock - Sketch.mp4 | 6.69 MB |
| | 02.CAMWorks 2.5 Axis Milling - 06.Defining Features Automatically.mp4 | 8.14 MB |
| | 02.CAMWorks 2.5 Axis Milling - 07.Defining Features Interactively.mp4 | 6.47 MB |
| | 02.CAMWorks 2.5 Axis Milling - 08.Generate Operation Plan.mp4 | 5.88 MB |
| | 01.Introduction to CAMWorks - 01.CAMWorks Interface.mp4 | 3.25 MB |
| | 01.Introduction to CAMWorks - 02.Process Overview.mp4 | 1.93 MB |
| | 02.Turning - 01.Introduction.mp4 | 723.88 KB |
| | 02.Turning - 02.Defining the Machine.mp4 | 9.3 MB |
| | 02.Turning - 03.Setup Tab.mp4 | 3.45 MB |
| | 02.Turning - 04.Defining the Stock - Bar Stock.mp4 | 3.4 MB |
| | 02.Turning - 05.Defining the Stock WIP file and STL.mp4 | 1.87 MB |
| | 02.Turning - 06.Defining the Stock Revolve Sketch.mp4 | 4.6 MB |
| | 02.Turning - 07.Defining Features Automatically.mp4 | 3.57 MB |
| | 02.Turning - 08.Defining Features Interactively.mp4 | 6.2 MB |
| | 2013-AdvancedAssemblies.zip | 62.52 MB |
| | 2013-AdvancedParts.zip | 30.1 MB |
| | 2013-CAMWorksMill-3Axis.zip | 11.23 MB |
| | 2013-CAMWorksMill.zip | 5.39 MB |
| | 2013-CAMWorksTurn.zip | 1.35 MB |
| | 2013-CSWAPrepCourse.zip | 3.08 MB |
| | 2013-CSWPCSWEPrepCourse.zip | 12.62 MB |
| | 2013-CoreConcepts.zip | 24.88 MB |
| | 2013-Drawings.zip | 11.68 MB |
| | 2013-FileManagement.zip | 2.26 MB |
| | V100Q1.flv | 39.67 MB |
| | V101Q1.flv | 15.97 MB |
| | V102Q1.flv | 21.05 MB |
| | V103Q1.flv | 18.18 MB |
| | V104Q1.flv | 13.74 MB |
| | V105Q1.flv | 19.47 MB |
| | V106Q1.flv | 11.53 MB |
| | V107Q1.flv | 13.12 MB |
| | V108Q1.flv | 12.09 MB |
| | V109Q1.flv | 14.98 MB |
| | 01.Assembly Structure - 01.Creating Sub-Assemblies.mp4 | 12.02 MB |
| | 01.Assembly Structure - 02.Flexible Sub-Assemblies.mp4 | 3.42 MB |
| | 01.Assembly Structure - 03.Empty Sub-Assemblies.mp4 | 2.99 MB |
| | 01.Assembly Structure - 04.Folders vs Sub-Assemblies.mp4 | 4.93 MB |
| | 01.Assembly Structure - 05.Sub-Assemblies in Drawings.mp4 | 3.69 MB |
| | 02.Assembly Features - 01.Assembly Feature.mp4 | 3.63 MB |
| | 02.Assembly Features - 02.Feature Scope.mp4 | 4.72 MB |
| | 02.Assembly Features - 03.Assembly Fillets.mp4 | 4.48 MB |
| | 02.Assembly Features - 04.Assembly Chamfers.mp4 | 3.99 MB |
| | 02.Assembly Features - 05.Weld Beads.mp4 | 3.68 MB |
| | 01.Advanced Sketching - 01.Polygon.mp4 | 1.7 MB |
| | 01.Advanced Sketching - 02.Ellipse.mp4 | 2.61 MB |
| | 01.Advanced Sketching - 03.Partial Ellipse.mp4 | 2.75 MB |
| | 01.Advanced Sketching - 04.Parabola.mp4 | 3.13 MB |
| | 01.Advanced Sketching - 05.Conic.mp4 | 3.66 MB |
| | 01.Advanced Sketching - 06.Splines.mp4 | 4.58 MB |
| | 01.Advanced Sketching - 07.Splitting Entities.mp4 | 1.7 MB |
| | 01.Advanced Sketching - 08.Derived Sketches.mp4 | 3.46 MB |
| | 01.Advanced Sketching - 09.Sketch Xpert.mp4 | 4.61 MB |
| | 01.Advanced Sketching - 10.Sketch Picture.mp4 | 5.93 MB |
| | 01.SolidWorks Certification - 01.Why Get Certified.mp4 | 1.32 MB |
| | 01.SolidWorks Certification - 02.Preparing for the Exam.mp4 | 2.35 MB |
| | 01.SolidWorks Certification - 03.What is the CSWA.mp4 | 5.24 MB |
| | 01.SolidWorks Certification - 04.What is the CSWP.mp4 | 4.79 MB |
| | 01.SolidWorks Certification - 05.CSWE and Other Certifications.mp4 | 2.75 MB |
| | 01.SolidWorks Certification - 06.SolidWorks Versions.mp4 | 2.91 MB |
| | 01.SolidWorks Certification - 07.Purchasing and Setting Up the Exam.mp4 | 7.52 MB |
| | 01.SolidWorks Certification - 08.Test Taking Strategy.mp4 | 7.55 MB |
| | 01.SolidWorks Certification - 09.Modeling Question Preview.mp4 | 7.55 MB |
| | 01.SolidWorks Certification - 10.Practice Exams.mp4 | 1.68 MB |
| | 01.Introduction - 01.Course Introduction.mp4 | 1.29 MB |
| | 01.Introduction - 02.SolidWorks Overview.mp4 | 7.3 MB |
| | 01.Introduction - 03.Interface.mp4 | 8.12 MB |
| | 01.Introduction - 04.Task Pane Resources.mp4 | 4.19 MB |
| | 01.Introduction - 05.View Manipulation.mp4 | 8.79 MB |
| | 02.The Sketcher - 01.The Sketcher.mp4 | 6.36 MB |
| | 02.The Sketcher - 02.Lines.mp4 | 6.93 MB |
| | 02.The Sketcher - 03.Rectangles.mp4 | 4.22 MB |
| | 02.The Sketcher - 04.Circles & Arcs.mp4 | 9.09 MB |
| | 02.The Sketcher - 05.Automatic Relations.mp4 | 8.72 MB |
| | 01.Drawings - 01.Intro to Drawings.mp4 | 7.36 MB |
| | 01.Drawings - 02.Model View.mp4 | 7.8 MB |
| | 01.Drawings - 03.Projected View.mp4 | 1.03 MB |
| | 01.Drawings - 04.Auxiliary View.mp4 | 1.42 MB |
| | 01.Drawings - 05.Section Views I.mp4 | 4.08 MB |
| | 01.Drawings - 06.Section Views II.mp4 | 7.68 MB |
| | 01.Drawings - 07.Assembly Section View.mp4 | 3.04 MB |
| | 01.Drawings - 08.Detail View.mp4 | 2.69 MB |
| | 01.Drawings - 09.Broken View.mp4 | 1.75 MB |
| | 01.Drawings - 10.Assembly Exploded View.mp4 | 3.58 MB |
| | 01.File Management - 01.File Relationships.mp4 | 6.76 MB |
| | 01.File Management - 02.References.mp4 | 7.81 MB |
| | 01.File Management - 03.Renaming Parts - Save As.mp4 | 7.1 MB |
| | 01.File Management - 04.Renaming Parts - SolidWorks Explorer.mp4 | 4.15 MB |
| | 01.File Management - 05.Document Revisions A.mp4 | 3.04 MB |
| | 01.File Management - 06.Document Revisions B.mp4 | 6.8 MB |
| | 01.File Management - 07.Reloading and Replacing.mp4 | 4.56 MB |
| | 01.Introduction to eDrawings - 01.eDrawings Overview.mp4 | 15.1 MB |
| | 01.Introduction to eDrawings - 02.Embedding and Sharing eDrawings files.mp4 | 6.32 MB |
| | 01.Introduction to eDrawings - 03.Additional Options and Saving as HTML.mp4 | 7.89 MB |
| | 01.Introduction to eDrawings - 04.Professional and Premium Options.mp4 | 7.49 MB |
| | 01.Mold Tools - Core and Cavity - 01.Draft Analysis A.mp4 | 12.83 MB |
| | 01.Mold Tools - Core and Cavity - 02.Draft Analysis B.mp4 | 2.44 MB |
| | 01.Mold Tools - Core and Cavity - 03.Scale.mp4 | 3.31 MB |
| | 01.Mold Tools - Core and Cavity - 04.Parting Lines.mp4 | 4.39 MB |
| | 01.Mold Tools - Core and Cavity - 05.Shut Off Surfaces.mp4 | 5.51 MB |
| | 01.Mold Tools - Core and Cavity - 06.Parting Surface.mp4 | 2.33 MB |
| | 01.Mold Tools - Core and Cavity - 07.Creating the Mold.mp4 | 6.43 MB |
| | 01.Mold Tools - Core and Cavity - 08.Side Cores A.mp4 | 5.94 MB |
| | 01.Mold Tools - Core and Cavity - 09.Side Cores B.mp4 | 6.56 MB |
| | 01.Mold Tools - Core and Cavity - 10.Intersect.mp4 | 2.21 MB |
| | 01.PhotoView 360 Basics - 01.Introduction.mp4 | 2.7 MB |
| | 01.PhotoView 360 Basics - 02.Scene Settings.mp4 | 5.82 MB |
| | 01.PhotoView 360 Basics - 03.APP_ying Appearances.mp4 | 4.44 MB |
| | 01.PhotoView 360 Basics - 04.Orienting the Model.mp4 | 1.4 MB |
| | 01.PhotoView 360 Basics - 05.Creating a Camera.mp4 | 7.29 MB |
| | 01.PhotoView 360 Basics - 06.Rendering the Image.mp4 | 8.35 MB |
| | 02.Exercises and Techniques - 01.Satellite Receiver - Part 1 Standard and Custom Views.mp4 | 5 MB |
| | 02.Exercises and Techniques - 02.Satellite Receiver - Part 2 Adding Blooms.mp4 | 2.29 MB |
| | 02.Exercises and Techniques - 03.Beer Bottle - Part 1 Decals.mp4 | 2.23 MB |
| | 02.Exercises and Techniques - 04.Beer Bottle - Part 2 Setting up the Scene.mp4 | 5.82 MB |
| | 02.Exercises and Techniques - 05.Beer Bottle - Part 3 Caustics and Rendering.mp4 | 6.73 MB |
| | 01.Sheet Metal Design - 01.Introduction to Sheet Metal.mp4 | 1.55 MB |
| | 01.Sheet Metal Design - 02.Base Flange 1.mp4 | 6.51 MB |
| | 01.Sheet Metal Design - 03.Base Flange 2.mp4 | 5.6 MB |
| | 01.Sheet Metal Design - 04.Bend Allowance.mp4 | 3.71 MB |
| | 01.Sheet Metal Design - 05.Bend Tables.mp4 | 4.82 MB |
| | 01.Sheet Metal Design - 06.Flat Pattern Options.mp4 | 7.59 MB |
| | 01.Sheet Metal Design - 07.Corner Trim.mp4 | 4.86 MB |
| | 01.Sheet Metal Design - 08.Edge Flange 1.mp4 | 5.96 MB |
| | 01.Sheet Metal Design - 09.Edge Flange 2.mp4 | 5.64 MB |
| | 01.Sheet Metal Design - 10.Edge Flange 3.mp4 | 3.16 MB |
| | 01.SimulationXpress - 01.Overview.mp4 | 2.85 MB |
| | 01.SimulationXpress - 02.Assumptions.mp4 | 5.93 MB |
| | 01.SimulationXpress - 03.Starting an Analysis.mp4 | 3.56 MB |
| | 01.SimulationXpress - 04.Units.mp4 | 1.99 MB |
| | 01.SimulationXpress - 05.Applying Fixtures.mp4 | 7.74 MB |
| | 01.SimulationXpress - 06.Applying Loads.mp4 | 8.72 MB |
| | 01.SimulationXpress - 07.Applying a Material.mp4 | 3.31 MB |
| | 01.SimulationXpress - 08.Running the Simulation.mp4 | 6.02 MB |
| | 01.SimulationXpress - 09.Interpreting Results - Stress and Dlsplacement.mp4 | 7.9 MB |
| | 01.SimulationXpress - 10.Factor of Safety.mp4 | 5.23 MB |
| | 01.Overview - 01.About this Course.mp4 | 6.28 MB |
| | 01.Overview - 02.What is SolidWorks_.mp4 | 1.66 MB |
| | 01.Overview - 03.Interface Tour.mp4 | 9.05 MB |
| | 01.Overview - 04.View Manipulation.mp4 | 12.08 MB |
| | 02.Intro to Part Design - 01.Starting a Part.mp4 | 4.25 MB |
| | 02.Intro to Part Design - 02.Starting a Sketch.mp4 | 12.78 MB |
| | 02.Intro to Part Design - 03.Sketch Tools.mp4 | 15.49 MB |
| | 02.Intro to Part Design - 04.Geometric Relations.mp4 | 16.47 MB |
| | 02.Intro to Part Design - 05.Dimensions.mp4 | 14.2 MB |
| | 02.Intro to Part Design - 06.Extrude Feature.mp4 | 6.14 MB |
| | 01.Surfacing - 01.What is a Surface.mp4 | 2.56 MB |
| | 01.Surfacing - 02.Basic Surfaces.mp4 | 6.02 MB |
| | 01.Surfacing - 03.Planar Surfaces.mp4 | 1.67 MB |
| | 01.Surfacing - 04.Ruled Surfaces Part A.mp4 | 4.08 MB |
| | 01.Surfacing - 05.Ruled Surfaces Part B.mp4 | 6.64 MB |
| | 01.Surfacing - 06.Offset Surfaces.mp4 | 1.62 MB |
| | 01.Surfacing - 07.Knit Surfaces.mp4 | 5.68 MB |
| | 01.Surfacing - 08.Trimming Surfaces Part A.mp4 | 5.5 MB |
| | 01.Surfacing - 09.Trimming Surfaces Part B.mp4 | 5.03 MB |
| | 01.Surfacing - 10.Extending Surfaces.mp4 | 2.28 MB |
| | 01.DimXpert - 01.Course Introduction.mp4 | 4.29 MB |
| | 01.DimXpert - 02.Overview of DimXpert.mp4 | 3.24 MB |
| | 01.DimXpert - 03.Auto Dimension.mp4 | 10.01 MB |
| | 01.DimXpert - 04.Datums.mp4 | 3.66 MB |
| | 01.DimXpert - 05.SizeDimensions.mp4 | 3.48 MB |
| | 01.DimXpert - 06.Location Dimension.mp4 | 3.32 MB |
| | 01.DimXpert - 07.Geometric Tolerance.mp4 | 3.38 MB |
| | 01.DimXpert - 08.Tolerance Status.mp4 | 3.74 MB |
| | 01.DimXpert - 09.DimXpert Options.mp4 | 4.89 MB |
| | 01.DimXpert - 10.Using DimXpert Information in Drawings.mp4 | 2.88 MB |
| | 01.The Design Library - 01.Introduction.mp4 | 1.46 MB |
| | 01.The Design Library - 02.Applying Library Features.mp4 | 3.4 MB |
| | 01.The Design Library - 03.Adding Custom Features to the Library.mp4 | 5.97 MB |
| | 01.The Design Library - 04.Editing and Locating the Library Feature.mp4 | 2.74 MB |
| | 01.The Design Library - 05.Changes to Library Features.mp4 | 3.69 MB |
| | 02.Toolbox - 01.Toolbox Overview.mp4 | 3.74 MB |
| | 02.Toolbox - 02.Setting Up and Adding in the Toolbox.mp4 | 6.98 MB |
| | 02.Toolbox - 03.Inserting Toolbox Components.mp4 | 4.47 MB |
| | 02.Toolbox - 04.Replacing Hardware.mp4 | 3.23 MB |
| | 02.Toolbox - 05.Hardware Stackups.mp4 | 7.01 MB |
| | 01.Fundamentals - 01.Working with Files in 2013.mp4 | 5.43 MB |
| | 01.Fundamentals - 02.Interface.mp4 | 5.12 MB |
| | 01.Fundamentals - 03.View Manipulation.mp4 | 9.77 MB |
| | 01.Fundamentals - 04.Measure Tool.mp4 | 2.77 MB |
| | 01.Fundamentals - 05.Searching Options and Sounds.mp4 | 1.93 MB |
| | 01.Fundamentals - 06.Appearances.mp4 | 7.95 MB |
| | 01.Fundamentals - 07.PhotoView 360.mp4 | 4.31 MB |
| | 01.Fundamentals - 08.CAD Admin Dashboard.mp4 | 9.38 MB |
| | 02.Sketching - 01.Conic Curves.mp4 | 8.87 MB |
| | 02.Sketching - 02.Sketch Dimension Input.mp4 | 2.85 MB |
| | 01.Appearances - 01.Introduction.mp4 | 2.92 MB |
| | 01.Appearances - 02.Appearances - Part A.mp4 | 4.57 MB |
| | 01.Appearances - 03.Appearances - Part B.mp4 | 4.26 MB |
| | 01.Appearances - 04.Copy and Paste Options.mp4 | 4.13 MB |
| | 01.Appearances - 05.Textural Appearances.mp4 | 4.96 MB |
| | 01.Appearances - 06.Advanced Mapping Options.mp4 | 6.1 MB |
| | 01.Appearances - 07.Surface Properties.mp4 | 5.54 MB |
| | 01.Appearances - 08.Appearance Illumination.mp4 | 1.1 MB |
| | 02.Scenes - 01.Scenes Overview.mp4 | 1.87 MB |
| | 02.Scenes - 02.Editing Scenes.mp4 | 2.75 MB |
| | 01.Appearances - 01.Introduction.mp4 | 2.92 MB |
| | 01.Appearances - 02.Appearances - Part A.mp4 | 4.57 MB |
| | 01.Appearances - 03.Appearances - Part B.mp4 | 4.26 MB |
| | 01.Appearances - 04.Copy and Paste Options.mp4 | 4.13 MB |
| | 01.Appearances - 05.Textural Appearances.mp4 | 4.96 MB |
| | 01.Appearances - 06.Advanced Mapping Options.mp4 | 6.1 MB |
| | 01.Appearances - 07.Surface Properties.mp4 | 5.54 MB |
| | 01.Appearances - 08.Appearance Illumination.mp4 | 1.1 MB |
| | 02.Scenes - 01.Scenes Overview.mp4 | 1.87 MB |
| | 02.Scenes - 02.Editing Scenes.mp4 | 2.75 MB |
| | 01.Weldments - 01.Introduction.mp4 | 2.62 MB |
| | 01.Weldments - 02.Structural Members.mp4 | 8.8 MB |
| | 01.Weldments - 03.Layout Sketches.mp4 | 6.52 MB |
| | 01.Weldments - 04.Trim and Extend Part A.mp4 | 6.83 MB |
| | 01.Weldments - 05.Trim and Extend Part B.mp4 | 9.09 MB |
| | 01.Weldments - 06.Plates and Fillet Beads.mp4 | 5.33 MB |
| | 01.Weldments - 07.Gussets and End Caps.mp4 | 9.09 MB |
| | 01.Weldments - 08.Weld Beads.mp4 | 11.47 MB |
| | 01.Weldments - 09.Weldment Bounding Boxes.mp4 | 2.96 MB |
| | 01.Weldments - 10.Cut Lists - Part A.mp4 | 7.88 MB |
| | _____padding_file_0_if you see this file, please update to BitComet 0 | 767.25 KB |
| | _____padding_file_1_if you see this file, please update to BitComet 0 | 75.12 KB |
| | _____padding_file_2_if you see this file, please update to BitComet 0 | 34.77 KB |
| | _____padding_file_3_if you see this file, please update to BitComet 0 | 174.07 KB |
| | _____padding_file_4_if you see this file, please update to BitComet 0 | 147.16 KB |
| | _____padding_file_5_if you see this file, please update to BitComet 0 | 857.96 KB |
| | _____padding_file_6_if you see this file, please update to BitComet 0 | 316.62 KB |
| | _____padding_file_7_if you see this file, please update to BitComet 0 | 885.12 KB |
| | _____padding_file_8_if you see this file, please update to BitComet 0 | 543.56 KB |
| | _____padding_file_9_if you see this file, please update to BitComet 0 | 119.47 KB |
| | _____padding_file_10_if you see this file, please update to BitComet 0 | 668.27 KB |
| | _____padding_file_11_if you see this file, please update to BitComet 0 | 972.53 KB |
| | _____padding_file_12_if you see this file, please update to BitComet 0 | 103.78 KB |
| | _____padding_file_13_if you see this file, please update to BitComet 0 | 617.12 KB |
| | _____padding_file_14_if you see this file, please update to BitComet 0 | 997.71 KB |
| | _____padding_file_15_if you see this file, please update to BitComet 0 | 199.6 KB |
| | _____padding_file_16_if you see this file, please update to BitComet 0 | 414.59 KB |
| | _____padding_file_17_if you see this file, please update to BitComet 0 | 170.1 KB |
| | _____padding_file_18_if you see this file, please update to BitComet 0 | 267.73 KB |
| | _____padding_file_19_if you see this file, please update to BitComet 0 | 382.96 KB |
| | _____padding_file_20_if you see this file, please update to BitComet 0 | 25.16 KB |
| | _____padding_file_21_if you see this file, please update to BitComet 0 | 752.91 KB |
| | _____padding_file_22_if you see this file, please update to BitComet 0 | 347.59 KB |
| | _____padding_file_23_if you see this file, please update to BitComet 0 | 923.28 KB |
| | _____padding_file_24_if you see this file, please update to BitComet 0 | 304.18 KB |
| | _____padding_file_25_if you see this file, please update to BitComet 0 | 427.81 KB |
| | _____padding_file_26_if you see this file, please update to BitComet 0 | 99.66 KB |
| | _____padding_file_27_if you see this file, please update to BitComet 0 | 687.12 KB |
| | _____padding_file_28_if you see this file, please update to BitComet 0 | 791 KB |
| | _____padding_file_29_if you see this file, please update to BitComet 0 | 162.05 KB |
Now you can download SolidProfessor Solidworks 2013 Folder (5.66 GB).
Enjoy :)