NuGen Audio Plugins Bundle 2014.02 WiN MacOSX-R2R [deepstatus][h33t][1337x][flashtorrents]

NuGen Audio Plugins Bundle 2014.02 R2R WiN MAC







NuGen.Audio.ISL.v1.2.0.Incl.Keygen-R2R
NuGen.Audio.ISL.v1.2.0.MacOSX.Incl.Keygen-R2R



ISL is a transparent look-ahead limiter designed to allow you to get on with creative audio production while it takes care of true-peak compliance for you.

ISL uses the standardised true-peak algorithms of ITU-R B.S. 1770 and related standards (including Apple ‘Mastered for iTunes’ true-peak detection), and is suitable for the control of audio for Post Production and Broadcast applications. True-peak limiting can also be used to ensure that down-stream Codecs (mp3, AAC etc.) do not introduce distortion into the signal.


Applications

Post Production & Broadcast audio
Audio Mastering
Loudness compliance
'Mastered for iTunes' intersample clip monitoring
Protection for downstream compression
Preserving quality for streaming/podcast
Inter-sample clip management

Supported Standards

Our loudness products are compatible with all recommendations and guidance based upon the international standard ITU-R B.S. 1770, revisions 1, 2 and 3 including:

ATSC A/85 (CALM ACT)
EBU R128
ARIB TR-B32
OP-59
AGCOM 219/9/CSP
DPP

Available formats

support AAX, VST, AU and AudioSuite in both 64-bit and 32-bit versions. RTAS is also available as 32-bit only.

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM

Windows XP or above, 512 MB RAM




NuGen.Audio.LMCorrect.v1.2.1.Incl.Keygen-R2R
NuGen.Audio.LMCorrect.v1.2.1.MacOSX.Incl.Keygen-R2R



LM-Correct gives you a unique, immediate and hassle-free route to loudness-compliant audio in your day-to-day loudness workflow, saving you time and preventing costly mistakes.

Either within your NLE/DAW or as a stand-alone application, LM-Correct delivers automated compliance with True-Peak correction, solving your compliance issues on the spot. Used in conjunction with a real-time meter, LM-Correct saves iterative adjustments to the mix as you approach target levels, allowing transparent in-edit 'quick-touch' finishing of your audio. It’s an essential part of your loudness toolkit.


Supported Standards

Our loudness products are compatible with all recommendations and guidance based upon the international standard ITU-R B.S. 1770, revisions 1, 2 and 3 including:

ATSC A/85 (CALM ACT)
EBU R128
ARIB TR-B32
OP-59
AGCOM 219/9/CSP
DPP

Available formats

LM-Correct supports AudioSuite (AAX) in both 64-bit and 32-bit versions. AudioSuite RTAS is also available as 32-bit only.

LM-Correct is also available as a stand alone application for Windows and OSX



Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM

Windows XP or above, 512 MB RAM




NuGen.Audio.Monofilter4.v4.1.9.Incl.Keygen-R2R
NuGen.Audio.Monofilter4.v4.1.9.MacOSX.Incl.Keygen-R2R



When solid or natural sounding bass is a requirement in your recording projects, Monofilter provides the foundation for real power and definition.

The non-directional nature of low frequencies can often contribute to a perceived lack of clarity and focus in the mix. Adding stereo FX processing and using multiple mic. set-ups in the studio can introduce phase inconsistencies leading to ‘weak’, ‘hollow’ or ‘flat’ sounds.

Monofilter lets you align and balance low frequencies with the minimum of effort, leaving you with the same sound, yet louder, more focussed and better defined. And with Monofilter you can be sure of great playback performance on systems with separate low-frequency handling, such as club PAs, live rigs, home cinema systems, HiFi, and 2.1 gaming systems.

Available formats

We support AAX, VST, AU and AudioSuite in both 64-bit and 32-bit versions. RTAS is also available as 32-bit only.

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM
Windows XP or above, 512 MB RAM



NuGen.Audio.MultiMonitor.v1.0.3.Incl.Keygen-R2R



MultiMonitor provides the most powerful multi-channel loudness and true-peak metering available today. 16 meters, each capable of mono, stereo or 5.1 formats (that’s up to 96 simultaneous audio channels) give you individual True Peak and LUFS momentary displays. Every meter has a dedicated numeric Short Term and Integrated LUFS data display and meters can be colour-coded to aid grouping. Meters also feature a minimum and maximum short-term alerts function. MultiMonitor is fully compliant with CALM Act legislation, ITU-R BS1770/1, ATSC A/85, EBU R128 and other specific worldwide localisations.

MultiMonitor is great for monitoring multiple playback sources or audio sub-groups simultaneously with 5.1 and stereo PGM output alongside the console in the audio control room. It’s ideal also in the MCR, monitoring multiple studios and formats simultaneously.

Applications

Perform station monitoring and historical diagnostic
Manage live broadcast levels rapidly and objectively
Achieve channel loudness consistency
Maintain loudness consistency across channels
Meet recent legislation and adopted standards
Harmonise program content
Consistently balance music/dialog/special effects

Supported Standards

MultiMonitor is compatible with all recommendations and guidance based upon the international standard ITU-R B.S. 1170, revisions 1, 2 and 3 including:

ATSC A/85 (CALM ACT)
EBU R128
ARIB TR-B32
OP-59
AGCOM 219/9/CSP
DPP

Available formats

Windows XP and above

SSL LMS-16
1RU PC + SSL Madi Xtreme 128 audio interface + GPI connectivity

Minimum System Specification

Windows XP or above, 512 MB RAM



NuGen.Audio.SEQ1.Master.Edition.v1.2.8.MacOSX.Incl.Keygen-R2R
NuGen.Audio.SEQ2.Master.Edition.v1.2.8.MacOSX.Incl.Keygen-R2R
NuGen.Audio.SEQ-S.v0.2.0.Incl.Keygen-R2R
NuGen.Audio.SEQ-S.v0.2.0.MacOSX.Incl.Keygen-R2R



SEQ-S gives you powerful sonic sculpting and EQ matching up to 7.1, with stereo mid-side operation and automated spectrum analysis. Massage and correct any audio with incredible resolution that you just can’t get with a traditional parametric interface.

A direct-draw interface and detailed spectrum analysis make it easy to quickly identify and specifically fine-tune your audio. Couple this with EQ matching via sonic fingerprinting and you have some unique possibilities.

Available formats

We support AAX, VST, AU and AudioSuite in both 64-bit and 32-bit versions. RTAS is also available as 32-bit only.

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM
Windows XP or above, 512 MB RAM



NuGen.Audio.Stereoizer3.v3.2.3.Incl.Keygen-R2R
NuGen.Audio.Stereoizer3.v3.2.3.MacOSX.Incl.Keygen-R2R



Stereoizer is a high-specification stereo image manipulation tool suitable for natural expansion, reduction and introduction of stereo width at any stage of the audio production process.

Developed for and tested by professional audio engineers, Stereoizer adds natural sounding width and depth to any audio recording, mono or stereo, leaving the inherent character of the original source intact. If you want a more coherent sound with polish and spatial balance but without adding artificial reverberation, chorusing or delay – Stereoizer is for you.

Applications

Mix | Sound Design

Expanding narrow stereo spectra
Introducing width to mono recordings
Enhancing the depth of FX return channels
Reigning in over enthusiastic spot FX
Creating 'centre space'
Settling 'forward' sounds
Generating panoramic ambience
Adding richness and gloss
Re-focussing central solidity
Avoiding heavy EQ and/or compression
Opening up cluttered frequencies
Fixing poorly positioned mic.'s
Adding depth, width and space to specific tracks
Enlivening static sounds

Mastering | Post | Restoration

Natural extrapolation of existing image
Frequency specific enhancement
Re-balancing
Taming eccentric material
Re-introduction of natural ambience
Firmly define existing stereo spectrum
Avoid changing the character with unnecessary EQ
Neutral stereo expansion/contraction
Subtle blending of inserts and returns
Pychoacoustic sweetening of frequency crowns

Available formats

We support AAX, VST, AU and AudioSuite in both 64-bit and 32-bit versions. RTAS is also available as 32-bit only.

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM
Windows XP or above, 512 MB RAM


NuGen.Audio.Stereoplacer3.v3.1.5.Incl.Keygen-R2R
NuGen.Audio.Stereoplacer3.v3.1.5.MacOSX.Incl.Keygen-R2R



Stereoplacer is an advanced fine-tune parametric balancing control. You can tune each band into specific frequencies and move the frequency content around in the stereo sound stage. Just choose the position you want, and let Stereoplacer take care of preserving the balance of the original sounds.

With fully adjustable curves (bell, high and low shelving and even additional linked-harmonic overtones) you can redistribute stereo information with subtlety, or make powerful corrections – even moving hard-panned frequencies from one side to the other – without affecting the overall level balance of the material.

Mix | Sound design

Panning sounds with low frequency content without affecting the low end
Adjusting the position of sounds in sample loops
Fixing poor mic. placement
Moving specific problem frequencies away from key lead sounds as an alternative to EQ
Dealing with harmonically complex synth sounds
Addressing issues on FX laden tracks
Creative and complex soundfield distribution
A sophisticated approach to double tracking stereo distribution
Capturing and positioning harmonically rich percussive sounds

Mastering | Post | Restoration

Gentle linear phase adjustment of entire mixes
Re-positioning of specific elements
Extrapolation of poorly positioned instruments
'Side switching' and re-balancing
Shifting of problem elements whilst leaving the rest of the soundfield intact
Detailed alignment of low frequency information

Available formats

We support AAX, VST, AU and AudioSuite in both 64-bit and 32-bit versions. RTAS is also available as 32-bit only.

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM
Windows XP or above, 512 MB RAM


NuGen.Audio.VisLM.v1.7.2.Incl.Keygen-R2R
NuGen.Audio.VisLM.v1.7.2.MacOSX.Incl.Keygen-R2R



With a unique design focused on primary loudness parameters, VisLM-H combines an instant overview with detailed historical information, enabling you to hit your target first time, every time.

Additional loudness logging and time-code functions allow for proof of compliance reporting and postmortem analysis with frame accurate referencing.

Economical efficiency

Elegant and simple to use, VisLM-H promotes a highly efficient workflow with the ability to drill down to any level of complexity the context demands. With VisLM-H, your loudness workflow is transparently integrated into the production environment.
Applications

Loudness normalisation introduces a common reference point for all stages of audio production, allowing audio professionals to remain in control of audio quality and meet the requirements of current and proposed legislation.

Post production

Hit specification easily and intuitively
Achieve average loudness harmonisation from differing sources
Balance music/dialog/special effects

Mixing | Mastering | Acquisition

Take control of audio quality at source
Avoid 'level shifting' further down the broadcast stream
Produce consistent masters

Broadcast | Transmission

Meet legislation and internal standards
Manage live broadcast levels rapidly and objectively
Consistently balance music/dialog/special effects

Supported Standards

Our loudness products are compatible with all recommendations and guidance based upon the international standard ITU-R B.S. 1770, revisions 1, 2 and 3 including:

ATSC A/85 (CALM ACT)
EBU R128
ARIB TR-B32
OP-59
AGCOM 219/9/CSP
DPP

Available formats

We support AAX, VST, AU and AudioSuite in both 64-bit and 32-bit versions. RTAS is also available as 32-bit only.

VisLM-H is also available as a stand alone application for Windows and OSX

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM
Windows XP or above, 512 MB RAM


NuGen.Audio.Visualizer.v1.9.7.MacOSX.Incl.Keygen-R2R



Measure, understand, correct. Visualizer gives you indispensable audio analysis for quality audio production, with a standardised reference set of professional tools that let you work faster, avoid mistakes, repeat past success and understand the success of others.

Single Intelligent Window System

Visualizer’s unique intelligent window facility lets you select multiple view combinations, automatically resizing and aligning windows to maximise legibility and cross referencing information across screens. No need to switch between plugins to get the combination of views you want. User configurable presets let you switch instantly between setups and interface sizes to build the workflow that suits you.


Available formats

Visualizer supports VST and AU formats in 32 bit.

Minimum System Specification

[color=darkorange]Mac OSX 10.6.x, 512 MB RA