MultiBoot 2k10 DVD / USB / HDD 5.9.3 Unofficial [Ru / En]

Additional InformationMultiboot 2k10 DVD / USB / HDD (author assembly for DVD). C9PE MultiMedia 2k10 Plus Pack CD / USB / HDD (single author repair assembly for CD).

How to create a bootable DVD or USB-Flash / USB-HDD1. For CD / DVD :You will need a program for recording images - for example, Nero Burning ROM. Run the program, Recorder -> Save image, specify the image file, make sure that it was noted "Finalize Disc" and write method "Disc-At-Once (DAO)". Disc with other recording settings will not boot! For Nero also recommended "Enable generation of short Lead-Out" (File -> Options -> Expert Features), it can reduce the recording time, speed up the time of recognition of the compact and slightly increase the "capacity" blanks. Write speed - the minimum within reasonable limits. Recommend 8-16h for CD-ROM drive or 4 - for the DVD. Principle is slower write -> faster (more reliable) are read. You can also use other programs, allows you to record images (eg, UltraISO, Alcohol 120, ...). 2. Installing assembly on flash drive : Attention !!! Many utilities (such as a standard windows format) are not completely format the USB flash drive, they look that it is, and do not touch the areas that they appear to be correct. Therefore, it is advisable to clean the stick, eg by RMPrepUSB, HDD Low Level Format Tool or run a test to record any of the utilities FlashNull, Check Flash, HD Tune Pro, Flash Memory Toolkit Pro, it's guaranteed to kill the layout and formatting will cause the program to make everything from scratch . After cleaning, be sure to "distort" the stick and run it after formatting check using CheckDisk (2k10  Programs-2k10  HDD-Utilites ). When bugs repeated cleaning stick and formatting. If you use formatting with BootICE -> Parts Manage -> ReFormat USB disk, it is unnecessary operations. BootICE when formatting automatically makes cleaning. 2.1 USB flash drive, you must first format (Note: All data on a flash drive will be destroyed). It is necessary to flash drive was seen Bios as USB-HDD, from which you can boot the operating system. If the flash drive / screw has been used as a boot, this step can be skipped. Stick is recommended to format a FAT32 (in this file system it runs longer and more stable), but, if necessary, you can use NTFS (faster "kills" the stick, requires a "safe removal", but supports files larger than 4GB). This is best done using RMPrepUSB (is in the assembly along the way 2k10  Programs-2k10  Flash-Utilites  RMPrepUSB or from the menu P2Start.exe "Programs 2k10  USB-Flash Utility"). This utility creates as close as possible to the screw geometry on a flash drive. If you check Boot as HDD (C: 2PTNS), on a flash drive will be created two partitions (half the minimum size for maximum imitation screws). But I do not recommend using this option, this flash drive will "hang" household appliances (TVs with flash player, players, etc.). It is enough to do, as in the figure. Alternative methods for formatting the flash (instead of 2.1) 2.1.1 Format the flash drive using the HP USB Disk Storage Format Tool (is in the assembly along the way 2k10  Programs-2k10  Flash-Utilites  HPUSBFW  or menu in section USB-Flash utility), you can use the quick format. Some PCs may not work (on a flash drive is connected properly loader). If it works, can be used for FAT32, and NTFS for. 2.1.2 Format the flash drive using BootICE (2k10  Programs-2k10  Flash-Utilites  BootICE ) ... so recommended format: BootICE (choose stick) -> Parts Manage -> ReFormat USB disk -> USB-HDD mode (Single Partition) - Align to sectors: 2048 -> Next -> FAT32 (NTFS) -> OK. Also does not always work, I - loader is connected correctly only under NTFS. 2.1.3 Using FBInstTool (2k10  Programs-2k10  Flash-Utilites  FBInstTool ). Utility for non-standard formatting flash drives, creates a structure of a special type (USB-ZIP or USB-HDD). Select the USB flash drive (focus on size!), Choose formatting options: -raw -force , format. 2.1.4 Using scripts FlashFormat_2k10_FBinst (2k10  Programs-2k10  Flash-Utilites  FlashFormat_2k10_FBinst ). Utility for non-standard formatting flash drives, creates a structure of a special type (USB-ZIP + USB-HDD). Select the USB flash drive (focus on size!), Use the method 7. RAW FORMAT , to format it. The script automatically reconnects the stick so "distort" after formatting it is not necessary. 2.1.5 To format a USB drive with automatic connection loader XORBOOT recommended to use the script : a) FlashFormat_2k10_FBinst - Method 1 (up to 2GB stick under FAT16) or Mode 2 (flash 4-32Gb under FAT32). Support USB-ZIP. On older systems will be loaded only WinXP-PE. b) FlashFormat_2k10_FBinst - way to 5 (up to 2GB stick under FAT16) or 6 way (stick 4-32Gb under FAT32). Support USB-ZIP + USB-HDD. On older systems will be loaded only Win7-PE. a) FlashFormat_2k10_RMprep - use if required support NTFS, use method 5 (flash drives of any size). Support only USB-HDD. The script will automatically reconnect the USB flash drive so "distort" after formatting it is not necessary. Scripts can be used by the OS, and under assembly (any), they will automatically connect XORBOOT in the MBR (sector 63, PBR is ignored). Immediately after formatting the USB flash drive, you can check for bootable (startup XORBOOT) under any Dev (eg, MobaLive). 2.2 After formatting, remove the USB flash drive and connect again. 2.3 should be added to the stick assembly files - a folder 2k10 , EFI and files bootm32.efi , bootmgr. efi , P2Start.exe . Bootmgr file on a flash drive / HDD is not used, so it is not copied. They can be unpacked from the image using 7-zip, WinRar, Total Commander, FAR, UltraISO or copy any of the installed Dev for CD / DVD virtual disk in the root of the stick. If reformatting the stick produced scripts - bootable media ready (loader XORBOOT connected). Faster will first extract the contents of the image to a temporary folder on the screw, and then copy all of it on a flash drive - repeatedly verified by experience. You can also mount an image as a virtual CD-ROM and copy from it - the effect is the same. If the creation of the stick is made ​​under the loaded assembly, convenient to mount the image using ImDisk (right click on the image, "mount ..."). The main loader, if you wish, you can set / change at any time, as in a conventional OS, and under any PE -sborkoy (for connection downloaders meet MakeBoot_HHH.bat batch file in the folder 2k10, where XXX - loader). 2.4 Using a bootloader Syslinux for flash drives : It is necessary to make the flash drive bootable. Go to the folder 2k10  on a flash drive and run MakeBoot_SYSLINUX.bat . This batch file will make the drive bootable. Please note that MakeBoot_SYSLINUX.bat need to run it from a flash drive (he defines on the drive letter). After working batch file your flash drive is ready for use. Under Windows Vista / 7/8 if enabled UAC, you must first put in the file properties attrib.exe (2k10  Syslinux  attrib.exe) Run as administrator! After working batch file your flash drive bootable (in the folder 2k10  Syslinux create a bootable file ldlinux.sys (attributes: hidden / system). Possible errors: "syslinux.exe" is not an internal or external command, operable program or batch file - appears when attempting to start the batch file under the x64 version of Windows. For proper mining need 32-bit version (Windows 2000 / XP / 2003 / Vista / W7). Alternative solutions - make on another computer or burn the image to a CD, boot from it and do everything due under LiveXP. 2.5 Using a bootloader Grub4Dos for flash drives : It is necessary to make the flash drive bootable. Go to the folder 2k10  on a flash drive and run MakeBoot_GRLDR.bat . This batch file will make the drive bootable. Note that MakeBoot_GRLDR.bat need to run it from a flash drive (he defines on the drive letter). After working batch file your flash drive is ready for use. Under Windows Vista / 7/8 if enabled UAC, you must first put in the file properties BSmod.exe (2k10  GRUB4DOS  OTHER  BSmod.exe) Run as administrator! This is not the only way to install the boot loader Grub4Dos, but one of the "compatible" to download. The loading is identical to that used for BOOTMGR (Vista / 7/8), in the boot area using the same registration (only adjusted by name GRUBMGR to avoid overlap with other assemblies / installer / ...). 2.6 Using a bootloader BOOTMGR for flash drives : It is necessary to make the flash drive bootable. Go to the folder 2k10  on a flash drive and run MakeBoot_BOOTMGR.bat . This batch file will make the drive bootable. Please note that MakeBoot_BOOTMGR.bat need to run it from a flash drive (he defines on the drive letter). After working batch file your flash drive is ready for use. Under Windows Vista / 7/8 if enabled UAC, you must first put in the file properties BootSect.exe (2k10  GRUB4DOS  OTHER  BootSect.exe) Run as administrator! This is the standard way to connect loader by using MicroSoft c BootSect. However, if desired, the loader can also be connected via BootICE. 2.7 Using a bootloader XORBOOT for flash drives : It is necessary to make the flash drive bootable. Go to the folder 2k10  on a flash drive and run MakeBoot_XORBOOT.bat . This batch file will make the drive bootable. Please note that MakeBoot_XORBOOT.bat need to run it from a flash drive (he defines on the drive letter). After working batch file your flash drive is ready for use. After working batch file will be written to the MBR boot XORBOOT, in the menu which will build all loaders (BOOTMGR, Grub4Dos and Syslinux) and a few "bonus". Installing the bootloader in the MBR only allows for better bootable on new PCs and allows quick access to any loader. 3. Installation on USB-HDD / HDD : 3.1 Screw you want to format any program on the breakdown of HDD, create a primary active / boot partition is the right size (at least 2GB). Choose the file system FAT32, but, if necessary, can be used and NTFS. If the HDD is used for parallel data transfer is convenient to break it this way: do two primary partitions (if necessary - can be more partitions, but always the first and last, under the assembly, - primary, may be in the middle of the logic). The first format the partition to fit your needs in FAT32 / NTFS / ..., the size of the capacity of the screw minus 3-5Gb. The second (or last section, for assembly) - make sure the active / boot, under FAT32. This section establishes the assembly. Why so? The most convenient way - if you need to delete the partition with the assembly, or, conversely, to increase the place under this section, the operation will be quickly made ​​using virtually any manager disks without data loss in the first sections. 3.2 is copying the assembly to the active partition HDD (similar to n. 2.3) and connect the loader (pp.2.4-2.7). Connect the HDD loader Syslinux performed in a second pass MakeBoot_SYSLINUX.bat (in the first - just the stick), read the hint! Under Windows Vista / 7/8 run a batch file as administrator! Alternative methods use the loader Grub4Dos using BootICE (2012) for flash drives / HDD : 1. Loader WEE. Placed in full MBR (PBR ignored), occupies 63 sectors (outside the box!). There are built-in menu (you can edit at installation), allows you to find and download NTLDR, BOOTMGR, GRLDR, ... Due to the originality is not recommended for universal flash, but very comfortable, such as Boot-Manager on the system drive. 2. GRUB4DOS in the MBR (PBR ignored), occupies 18 sectors (outside the box!). Immediately starts GRLDR. In connection with the non-standard is not recommended for universal flash. 3A. USB-HDD + in an MBR, registration GRUB4DOS in PBR. Not a bad option, and put runs on most flash drives, particularly suited for FAT32. 3B. USB-HDD + in an MBR, NTLDR residence in the PBR. When installing or rename loader rough in the root directory on the NTLDR, or specify the name of GRLDR with registration in PBR (cm. in the picture). Not a bad option, similar to 3A. 3C. USB-HDD + in an MBR, registration BOOTMGR in PBR. When installing or rename loader rough in the root directory on the BOOTMGR, or specify the name of GRLDR (or GRUBMGR for assembly) for registration in PBR. Not a bad option, similar to 3A. 4B. Windows NT 5.x MBR of the MBR, NTLDR residence in the PBR. When installing or rename loader rough in the root directory on the NTLDR, or specify the name of GRLDR with registration in PBR (cm. in the picture). A good option for bootability on different hardware, but rarely works on flash cards (depending on the chip stick?), especially under FAT32. 5C. Windows NT 6.x MBR of the MBR, registration BOOTMGR in PBR. When installing or rename loader rough in the root directory on the BOOTMGR, or specify the name of GRLDR (or GRUBMGR for assembly) for registration in PBR. A great option for bootability on different hardware on Some USB flash drives may not work under FAT32 (depends on chip flash?). Implemented a batch file in assemblies 2.6.0 / 2.6.1. My recommendation: for flash drives, if you do not need to transfer files larger than 4GB try to install batch file, check the load in MobaLive. If does not work - use NTFS + batch file or the option to install using BootICE - 3C (3A, 3B - they are virtually identical) to FAT32.