KMS MICRO - 5.0.1 bY {KiNgZrUlEx}

Program Version : 5.0.1
Link Program author : Ratiborus
Language : Russian, English, Spanish
Treatment : not required

System requirements

PC/x86 any compatible computer (running inside the virtual machine)
250-512 MB of RAM
Keyboard
Mouse
You can run from a flash drive
. Net Framework 4.5
requirements for disk space (approximately) :
? 200 MB Description : KMSmicro 5.0.0 - a local KMS server to activate Windows 7 - 8.1, Office 2010-2013 VL editions. The program does not activate the Retail version and Windows 8-8.1 WMC. KMSmicro has access to the Internet for clock synchronization.

Features:
Counters activate KMS-server screwed on startup.


time / date KMS server is synchronized with the startup time / date the host.

Working with the program:
I . before using
Make sure that the laptop port 1688 is not used by another activator:
ZWT KMS Keygen and activators that use it.
Remove these activators, stop the process ZWT KMS Keygen II . KMSmicro Run Run KMSmicro.exe III . Setting the date / time KMSmicro For successful KMS-activation is important that the time-activated computer and KMS-server differed by no more than ± 1.5 hours. Thus, the exchange is used UTC (Coordinated Universal Time), which may be different from what is displayed on the computer's clock. Therefore, it is important to set date / time KMSmicro. For 99% of the users apply the following procedure :

Start KMSmicro.

Replace KMSmicro time zone that corresponds to the time-zone-activated computer (supplied KMSmicro its time zone is set to UTC +04 (GMT, Greenwich).
Turn off KMSmicro.
When you run KMSmicro his time is automatically synchronized with the time-activated computer (that runs KMSmicro).
Conveniently, you can activate without readjustment all the computers in your region (provided that they are exposed to correct / same time zone).
If you spend all sorts of experiments, after the start, set the necessary KMSmicro:
Time-zone
Date
Time

After setting up KMSmicro Console tab "Settings" you can set a tick on "Run QEMU without GUI", in this mode, the console will be run in a hidden form. IV. Product Activation Windows 7 or Office 2010-2013 installed on Windows 7-8 : On the network configuration settings, select "Network 127.0.0.2:1688" IP address 127.0.0.2 in the Main window, click "Start KMSmicro" and look forward to when KMSmicro Console boot. Enable. Windows 8.1, Office 2010, Office 2013 installed on Windows 8.1 : Install in TAP-Windows Adapter. To do this, go to "Settings" program and click the "Install TAP". Once the adapter is installed it should be renamed "tap1" Sometimes the TAP adapter is not initialized, KMSmicro Console does not start. You can read about some of the log QEMU, by clicking on the "Settings" tab click "Log QEMU". Helps remove and reinstall the adapter, reboot. Select the tab of the "Network Connections" your network adapter and TAP-Windows Adapter tap1 hold down the Ctrl key and pressing the right mouse button, select the menu item "Setting the Bridge" on the "Settings" tab, select Network Settings " network through the TAP interface " in the main window click "Start KMSmicro Console" and look forward to when KMSmicro Console boot. Enable. * Item Number 2, you can not perform, the activation goes without NIC teaming bridge. But KMSmicro Console will not have access to the Internet.

NOTE: MTK 2.5 BETA is required to activate Windows 8.1/Server 2012 R2, or Microsoft Office 2013 on those Operating Systems!