| | | 01_Introduction_and_project_overview.mp4 | 13.25 MB |
| | | 02_Setting_up_reference_images.mp4 | 84.36 MB |
| | | 03_Drawing_out_the_wheel_arch.mp4 | 94.32 MB |
| | | 04_Connecting_wheel_arches_to_create_the_side.mp4 | 80.24 MB |
| | | 05_Extruding_up_the_side_of_the_car.mp4 | 108.42 MB |
| | | 06_Drawing_out_the_side_panels.mp4 | 60.36 MB |
| | | 07_Extruding_in_the_door_scoop.mp4 | 59.88 MB |
| | | 08_Bridging_across_the_A_pillar.mp4 | 73.18 MB |
| | | 09_Extruding_across_the_top_of_the_car.mp4 | 50.38 MB |
| | | 10_Building_out_the_front_of_the_car.mp4 | 75.96 MB |
| | | 11_Extruding_the_hood.mp4 | 84.38 MB |
| | | 12_Separating_the_side_panels.mp4 | 117.32 MB |
| | | 13_Building_the_front_bumper.mp4 | 79.09 MB |
| | | 14_Beginning_the_rear_end.mp4 | 103.7 MB |
| | | 15_Detailing_the_rear_end.mp4 | 67.76 MB |
| | | 16_Detailing_the_tail_light_area.mp4 | 95.11 MB |
| | | 17_Adding_detail_to_the_trunk.mp4 | 89.55 MB |
| | | 18_Modeling_underneath_the_rear_end.mp4 | 56.36 MB |
| | | 19_Adding_thickness_to_the_panels.mp4 | 97 MB |
| | | 20_Modeling_underneath_the_front_end.mp4 | 35 MB |
| | | 21_Modeling_the_belly_pan.mp4 | 79.44 MB |
| | | 22_Adding_the_plenum.mp4 | 29.19 MB |
| | | 23_Building_the_door_handle.mp4 | 51.78 MB |
| | | 24_Adding_the_door_lock.mp4 | 41.75 MB |
| | | 25_Modeling_the_door_trim_pieces.mp4 | 83.65 MB |
| | | 26_Building_the_rear-view_mirror.mp4 | 101.17 MB |
| | | 27_Modeling_the_head_light.mp4 | 119.44 MB |
| | | 28_Finishing_the_head_light.mp4 | 81.62 MB |
| | | 29_Adding_the_LEDs.mp4 | 74.21 MB |
| | | 30_Modeling_the_head_light_mesh.mp4 | 94.42 MB |
